Precision Agriculture Science and Technology ISSN:2672-0086(Print) 2713-5632(Online) 정밀농업과학기술

Precision water management is crucial in greenhouse agriculture to maximize crop yields in sandy soil. Due to the low water holding capacity, it is necessary to monitor the water movement in different depths of sandy soil to ensure effective irrigation. Therefore, this study aimed to develop a data acquisition (DAQ) system for sandy soil water content monitoring in an experimental soil bin inside a greenhouse, utilizing the capabilities of the Internet of Things (IoT). A drip irrigation system was implemented, arranged in four pipelines, spaced 60 cm apart, with drippers placed at 30 cm intervals along the pipeline. The overall system was installed in a sandy soil testing bin. A DAQ system was comprised of three basic units: sensor interfacing and circuit board, programming and sensor data acquisition, and data storage and monitoring. A microprocessor was used by interfacing a set of soil water content sensors, ambient temperature, and humidity sensors. The water content sensors were placed in the soil at different depths of 10, 20, 30, 40, and 50 cm, respectively. A microcontroller was collected and sent the sensor data to monitor and store in memory. During the test, the maximum and minimum average of soil water content, ambient temperature, and humidity values were observed at 33.91±2.5 to 26.95±1.3%, 21.39±2.1 to 42.84±1.7°C, and 48.73±2.3 to 99.90±0.3%, respectively. The water content percentages were varied at different depths of sandy soil due to low water holding capacity. The developed automatic DAQ system would help with remote monitoring and control of greenhouse irrigation, considering the different crop characteristics and environmental conditions.