All Issue

2024 Vol.6, Issue 3 Preview Page

Research Article

Mechanization trends of cabbage harvesting practices: A review
Mohammod Ali12
,
Md Asrakul Haque1
,
Md Aminur Rahman1
,
Jeong-Min Moon3
,
Kyoung-Joong Kim4
,
Sun-Ok Chung12*
,
Hye-In Kim5
1Department of Agricultural Machinery Engineering, Graduate School, Chungnam National University, Daejeon 34134, Republic of Korea
2Department of Smart Agricultural Systems, Graduate School, Chungnam National University, Daejeon 34134, Republic of Korea
3Hongseong-gun Agricultural Technology Center, Hongseong 32249, Republic of Korea
4Boryeong City Hall, Boryeong 33415, Republic of Korea
5Asan-si Agricultural Technology Center, Asan 31445, Republic of Korea
*Corresponding Author
†These authors contributed equally to this work.
30 September 2024. pp. 218-237
PDF XML Citation
Abstract

Cabbage harvesting practices have undergone significant technological advancements, shifting from traditional manual methods to advanced mechanized systems. This review paper examines the trends of cabbage harvesting mechanization, focusing on the development of mechanical harvesters, application of precision agriculture techniques, and emerging technologies that are shaping the future of cabbage production. The transition from manual to mechanical harvesting began with the introduction of basic cutting and collecting equipment. Modern cabbage harvesters are equipped with multi-row operations, advanced cutting mechanisms, integrated conveyor systems, cleaning and sorting functions, and automated loading capabilities, which significantly enhance the efficiency of cabbage harvesting. Recent trends emphasize the integration of precision agriculture and advanced technologies to reduce harvesting losses, improve production, lower labour requirements, and enhance cabbage quality. Despite these advancements, challenges like high initial investment costs, fragmented land conditions, potential crop damage, and difficulties adapting to diverse field conditions can account for the limited progress in mechanization worldwide. Nonetheless, a few advanced mechanizations have transformed cabbage harvesting in developed countries, increasing production and reducing reliance on manual labour. This paper provides suitable insights for researchers and manufacturers aiming to become familiar with advanced cabbage harvester technology.

Keywords
Agricultural machinery
Cabbage harvester
Cabbage collector
Cutting mechanism
Cabbage conveyor
References
1

Alatyrev, A.S., Emel'yanov, N.A., Nikitin, V.S., Kruchinkina, S.I., Alatyrev, S.S. 2024. Combine harvester for harvesting cabbage in small-scale farming. Tractors and Agricultural Machinery 91(2): 155-165. https://doi.org/10.17816/0321-4443-595938

10.17816/0321-4443-595938
2

Alatyrev, S., Yunusov, G., Kruchinkina, I., Alatyrev, A. 2020. Development of technology and means for machine harvesting of head cabbage in the non-damaging mode. In IOP Conference Series: Earth and Environmental Science 604(1): 012020. https://doi.org/10.1088/1755-1315/604/1/012020

10.1088/1755-1315/604/1/012020
3

Ali, M., Lee, Y.S., Chowdhury, M., Khan, N.A., Swe, K.M., Rasool, K., Kabir, M.S., Lee, D.H., Chung, S.O. 2021. Analysis of driving stability and vibration of a 20-kw self-propelled 1-row Chinese cabbage harvester. Journal of Biosystems Engineering 46: 48-59. https://doi.org/10.1007/s42853-021-00087-w

10.1007/s42853-021-00087-w
4

Ali, M., Lee, Y.S., Kabir, M.S.N., Kang, T.K., Lee, S.H., Chung, S.O. 2019. Kinematic analysis for design of the transportation part of a tractor-mounted Chinese cabbage collector. Journal of Biosystems Engineering 44: 226-235. https://doi.org/10.1007/s42853-019-00033-x

10.1007/s42853-019-00033-x
5

Alatyrev, S.S., Alatyrev, A.S., Misihin, P.V., Pushkarenko, N.N., Mikhailova, O.V., Loskutov, Y.V., Volkhonov, M.S., Ovchukova, S.A. 2018. Operating staff optimization in gas of headed cabbages mechanical harvesting under adaptive technologies. Advances in Engineering Research 151: 17-23. https://doi.org/10.2991/agrosmart-18.2018.4

10.2991/agrosmart-18.2018.4
6

Alatyrev, S.S., Kruchinkina, I.S., Alatyrev, A.S., Vasilyev, A.O., Andreev, R.V. 2020. Technology and parameters of cabbage machine harvesting by careful stacking of heads in containers. In IOP Conference Series: Earth and Environmental Science 433:012005. https://doi.org/10.1088/1755-1315/433/1/012005

10.1088/1755-1315/433/1/012005
7

Albarran, S., Albarran, D., Alejo, J., Barajas, I., Bascou, R., Castillo, D.J. 2017. Decoring mechanism with mechanized harvester. Patent number: EP2717670A1 European Patent Office.

8

Asano, M., Onishi, K., Fukao, T. 2023. Robust cabbage recognition and automatic harvesting under environmental changes. Advanced Robotics 37(15): 960-969. https://doi.org/10.1080/01691864.2023.2219295

10.1080/01691864.2023.2219295
9

AtlasBig. 2024. Countries with the highest cabbage production. AtlasBig. Retrieved September 3, 2024, from https://www.atlasbig.com/en-us/countries-cabbage-production

10

Bergerman, M., Billingsley, J., Reid, J., van Henten, E. 2016. Robotics in agriculture and forestry In Springer Handbook of Robotics; Siciliano, B., Khatib, O., Eds. pp. 1463-1492. https://doi.org/10.1007/978-3-319-32552-1_56

10.1007/978-3-319-32552-1_56
11

Bhagwan, S., Narwariya, K.N., Agrawal, B.M., Nandede. 2023. A comparison of cabbage crop growth parameters and harvest maturity indices under different planting methods, with an emphasis on mechanical harvesting. Journal of Applied Horticulture 25(1): 43-47. https://doi.org/10.37855/jah.2023.v25i01.07

10.37855/jah.2023.v25i01.07
12

Bolhuis, M.W., Bolhuis, P.T.J.N.R., Bolhuis, P.T.S.N.R. 2007. Cabbage harvesting machine. Patent number: EP 1 304 914 B1. European Patent Office.

13

Cai, J.J., Zhang, J.X., Tiemuer, Y., Gao, Z.M., Rui, Z.Y., Liu, X. 2020. Design and experiment of clamping belt cotton stalk harvester. Journal of Agricultural Machinery 51: 152-160.

14

Calif, S. 2017. Taylor farms continues investing in automated harvesting. 2017. The Packer. Retrieved from https://www.thepacker.com/news/food-safety/taylor-farms-continues-investing-automated-harvesting

15

Clifton seed (2024). Cabbage comparison chart. Retrieved October 2, 2024, from https://www.cliftonseed.com/pages/cabbage-comparison-chart

16

Chagnon, R., Charles, M.T., Fortin, S., Boutin, J., Lemay, I., Roussel, D. 2004. Development of a cabbage harvester. In: Proceedings of the ASAE Annual Meeting, St. Joseph, MI, USA, 1-4 August 2004. Paper Number 041025.

17

Chowdhury, M., Ali, M., Habineza, E., Reza, M.N., Kabir, M.S., Lim, S.J., Choi, I.S., Chung, S.O. 2023. Analysis of rollover characteristics of a 12 kW automatic onion transplanter to reduce stability hazards. Agriculture 13(3): 652. https://doi.org/10.3390/agriculture13030652

10.3390/agriculture13030652
18

Dongdong, D., Jun, W., Shanshan, Q. 2015. Analysis and test of splitting failure in the cutting process of cabbage root. International Journal of Agricultural and Biological Engineering 8(4): 27-34. https://www.doi.org/10.3965/j.ijabe.20150804.1723

19

Du, D., Wang, J., Xie, L., Deng, F. 2019. Design and field test of a new compact self-propelled cabbage harvester. Transactions of the ASABE 62(5): 1243-1250. https://doi.org/10.13031/trans.13327

10.13031/trans.13327
20

Du, D., Xie, L., Wang, J., Deng, F. 2016. Development and tests of a self-propelled cabbage harvester in China. ASABE Annual International Meeting Presentation. Orlando, Florida. Paper Number: 162459786.

21

Du, D.D. 2017. Research on crawler self-propelled cabbage harvesting equipment and development of its weighing system; Zhejiang University: Hangzhou, China.

22

El Didamony, M.I., El Shal, A.M. 2020. Fabrication and evaluation of a cabbage harvester prototype. Agriculture 10(12): 631. https://doi.org/10.3390/agriculture10120631

10.3390/agriculture10120631
23

Fahey, J.W. 2003. Brassicas. Encyclopedia of Food Sciences and Nutrition. 606-615. https://doi.org/10.1016/B0-12-227055-X/00118-8

10.1016/B0-12-227055-X/00118-8
24

FDL (Fine dining lovers) 2024. 10 Different cabbage varieties and how to cook them. Retrieved October 2, 2024, from https://www.finedininglovers.com/article/types-of-cabbage-characteristics

25

Gao, L., Bai, Y., Liu, X. 2015. Evaluation of precision agriculture technologies for soil health improvement. Computers and Electronics in Agriculture 114: 103-110.

26

Gao, S., Yuan, Y., Zhang, W., Niu, K., Zhao, B., Zhou, L., Zheng, Y. 2024. Parameter Optimization Design and Experiment of Root-cutting Device of Self-propelled Chinese Cabbage Harvester. IEEE Access. https://doi.org/10.1109/ACCESS.2024.3454669

10.1109/ACCESS.2024.3454669
27

Hachiya, M., Amano, T., Yamagata, M., Kojima, M. 2004. Development and utilization of a new mechanized cabbage harvesting system for large fields. Japan Agricultural Research Quarterly 38(2): 97-103. https://doi.org/ 10.6090/jarq.38.97

10.6090/jarq.38.97
28

Han, K.M., Ali, M., Swe, K.M., Islam, S., Chung, S.O., Kim, D.G. 2021. Fabrication and field performance test of a tractor-mounted 6-row cabbage collector. Korean Journal of Agricultural Science 48(1): 141-149. https://doi.org/10.7744/kjoas.20210008

10.7744/kjoas.20210008
29

Hong, S., Yun, Y., Won, D., Lee, K. 2015. Analysis of patent and technology used for harvester of upland crops. In Korean Society for Agricultural Machinery. 135-136

30

Jang, B.E., Chowdhury, M., Ali, M., Islam, M.N., Swe, K.M., Jung, D.U., Chung, S.O. 2021. Stability and vibration analysis of a tractor-mounted Chinese cabbage collector. In IOP Conference Series: Earth and Environmental Science 733: 012021. https://doi.org/10.1088/1755-1315/733/1/012021

10.1088/1755-1315/733/1/012021
31

Kabir, M.S., Gulandaz, M.A., Ali, M., Reza, M.N., Kabir, M.S.N., Chung, S.O., Han, K. 2024. Yield monitoring systems for non-grain crops: A review. Korean Journal of Agricultural Science 51(1): 63-77. https://doi.org/10.7744/kjoas.510106

10.7744/kjoas.510106
32

Kanamitsu, M., Yamamoto, K., 1996. Development of Chinese cabbage harvester. Japan Agricultural Research Quarterly 30: 35-41.

33

Kanamitsu, S., Yamamoto, S. 1998. Physical properties of Chinese cabbage varieties and their impact on harvesting equipment design. Journal of Japanese Society of Agricultural Machinery 60(2): 75-80.

34

Kiraga, S., Reza, M.N., Ali, M., Chowdhury, M., Gulandaz, M.A., Islam, M.N., Islam, S., Chung, S.O. 2021. Potential of impact-based weight sensing of individual Chinese cabbage for real-time yield monitoring. InIOP Conference Series: Earth and Environmental Science 924: 012015. https://doi.org/10.1088/1755-1315/924/1/012015

10.1088/1755-1315/924/1/012015
35

Lee, Y.S., Ali, M., Islam, M.N., Rasool, K., Jang, B.E., Kabir, M.S., Kang, T.K., Chung, S.O. 2020. Theoretical analysis of bending stresses to design a sprocket for transportation part of a Chinese cabbage collector. Journal of Biosystems Engineering 45: 85-93. https://doi.org/10.1007/s42853-020-00047-w

10.1007/s42853-020-00047-w
36

Lee, Y.S., Jang, B.E., Kim, Y.J., Chung, S.O., Choi, Y.S., Ji, K.B. 2018. Structural analysis of the transportation and the power transmission parts for design of a self-propelled and small sized Chinese cabbage harvester. In Proceeding of ASABE Annual International Meeting (paper no.1800434). Michigan, USA: St. Joseph. https://doi.org/10.13031/aim.201800434

10.13031/aim.201800434
37

Li, C., Tian, Y., Xie, F., Song, C., Wang, C. 2023. Design of root cutting device for Chinese cabbage and research on cutting simulation. In International Conference on Mechatronics Engineering and Artificial Intelligence (MEAI 2022) (Vol. 12596, p. 125960O). SPIE. https://doi.org/10.1117/12.2671834

10.1117/12.2671834
38

Li, J., Yang, X., Tong, X., Peng, Y., Deng, Y., Yan, X., Zhou, Y. 2023. Cleaner production of Chinese cabbage by intercropping from Cd contaminated soil: Effects of hyperaccumulator variety and planting strip width. Chemosphere 341:139975. https://doi.org/ 10.1016/j.chemosphere.2023.139975

10.1016/j.chemosphere.2023.139975
39

Li, X., Wang, F., Guo, W., Gong, Z., Zhang, J. 2013. Influencing factor analysis of cabbage root cutting force based on orthogonal test. Transactions of the Chinese Society of Agricultural Engineering 29(10): 42-48.

40

Liu, W., Anguelov, D., Erhan, D., Szegedy, C., Reed, S., Fu, C.Y., Berg, A.C. 2016. Ssd: Single shot multibox detector. In Computer Vision-ECCV 2016: 14th European Conference, Amsterdam, The Netherlands, October 11-14, 2016, Proceedings, Part I 14 (pp. 21-37). Springer International Publishing. https://doi.org/10.1007/978-3-319-46448-0_2

10.1007/978-3-319-46448-0_2
41

Lowenberg-DeBoer, J., Huang, I.Y., Grigoriadis, V. 2020. Economics of robots and automation in field crop production. Precision Agriculture 21:278-299. https://doi.org/10.1007/s11119-019-09667-5

10.1007/s11119-019-09667-5
42

Maggioni, L. 2015. Domestication of Brassica oleracea L. Ph.D. dissertation, Swedish University of Agricultural Sciences, Uppsala, Sweden.

43

Maggioni, L., Von Bothmer, R., Poulsen, G., Branca, F. 2010. Origin and domestication of colecrops (Brassica oleracea). linguistic and literary considerations. Economic Botany 64: 109-123. https://doi.org/10.1007/s12231-010-9115-2

10.1007/s12231-010-9115-2
44

Mahmud, M.S., Zahid, A., Das, A.K. 2023. Sensing and automation technologies for ornamental nursery crop production: Current status and future prospects. Sensors 23(4): 1818. https://doi.org/10.3390/s23041818

10.3390/s23041818
45

MI (Mordor Intelligence). 2024. Cabbages & Other Brassicas market - growth, trends, and forecasts (2024-2029). https://www.mordorintelligence.com/industry-reports/cabbages-and-other-brassicas-market

46

Mulgan, A.G. 2000. The politics of agriculture in Japan; Routledge: London, UK, ISBN 0-203-46445-1.

47

Park, S.J., Lee, S.Y., Park, W.J., Yang, K.W., Ali, M., Kim, H.J. 2021. Preliminary tests for Chinese cabbage harvesting with harvesting simulator. Journal of the Korea Academia-Industrial cooperation Society 22(12): 470-479. https://doi.org/10.5762/KAIS.2021.22.12.470

10.5762/KAIS.2021.22.12.470
48

Park, Y., Son, H.I. 2022. A sensor fusion-based cutting device attitude control to improve the accuracy of Korean Cabbage Harvesting. Journal of the ASABE 65(6): 1387-1396. https://doi.org/10.13031/ja.14851

10.13031/ja.14851
49

Qiu, F., Shao, C., Zhou, C., Yao, L. 2024. A method for cabbage root posture recognition based on YOLOv5s. Heliyon 10(13) e31868. https://doi.org/10.1016/j.heliyon.2024.e31868

10.1016/j.heliyon.2024.e31868
50

Redmon, J., Divvala, S., Girshick, R., Farhadi, A. 2016. You only look once: Unified, real-time object detection. In Proceedings of the IEEE conference on computer vision and pattern recognition. pp. 779-788. https://doi.org/10.1109/CVPR.2016.91

10.1109/CVPR.2016.91
51

Ren, S., Girshick, R., Sun, J. 2015. Faster R-CNN: towards real time object detection with region proposal networks. In: Advances in Neural Information Processing Systems 28 (NIPS); Montreal, QC.

52

Reza, M.N., Chowdhury, M., Ali, M., Kiraga, S., Chung, S.O., Hong, S.J., Choi, I.S. 2021. Field capacity, efficiency and economic analysis of a tractor-mounted 4-row Chinese cabbage collector. Precision Agriculture Science and Technology 3(4): 175-188. https://doi.org/10.12972/pastj.20210018

10.12972/pastj.20210018
53

Royal Horticultural Society (RHS). 2024. How to grow cabbages. Retrieved August 24, 2024, from https://www.rhs.org.uk/vegetables/cabbages/grow-your-own

54

Šamec, D., Pavlović, I., Salopek-Sondi, B. 2017. White cabbage (Brassica oleracea var. capitata f. alba): Botanical, phytochemical and pharmacological overview. Phytochemistry Reviews 16(1): 117-135. https://doi.org/10.1007/s11101-016-9454-4

10.1007/s11101-016-9454-4
55

Sarkar, P., Raheman, H. 2021. A Comprehensive Review of mechanized cabbage harvesting systems and its present status in India. Journal of The Institution of Engineers (India): Series A 102: 861-869. https://doi.org/10.1007/s40030-021-00557-6

10.1007/s40030-021-00557-6
56

Sarkar, P., Raheman, H. 2023. Development of a laboratory setup simulating cabbage harvesting mechanism and optimization of torque requirement for harvesting cabbage. Spanish Journal of Agricultural Research 21(1): e0203. https://doi.org/10.5424/ sjar/2023211-19979

10.5424/sjar/2023211-19979
57

Sarkar, P., Raheman, H. 2024. Development and performance evaluation of an electric cabbage harvester with a precise cabbage pushing mechanism. Smart Agricultural Technology 8: 100465. https://doi.org/10.1016/j.atech.2024.100465

10.1016/j.atech.2024.100465
58

Schumacher, M., Spaeth, M., Naruhn, G., Reiser, D., Messelhäuser, M., Witty, R., Peteinatos, G. 2023. Ecologically Based Weed Management in Vegetable Crops. Ecologically‐Based Weed Management: Concepts, Challenges, and Limitations 248-260. https://doi.org/10.1002/9781119709763.ch13

10.1002/9781119709763.ch13
59

Shah, M., Doshi, A., Shah, K., Kshirsagar, A. 2023. Transforming agricultural technology by artificial intelligence and robotics. CRC Press. https://doi.org/10.1201/9781003213550

10.1201/9781003213550
60

Shettima, B.G., Ibrahim, A., Mohammed, S.T., Zongoma, B. A. 2016. Economic efficiency of irrigated vegetable production in borno state Nigeria: a stochastic frontier cost function approach. Asian Journal of Agricultural Extension, Economics & Sociology 12(4):1-14. https://doi.org/10.9734/AJAEES/2016/28494

10.9734/AJAEES/2016/28494
61

Song, K.S., Hwang, H., Hong, J.T. 2000. Automatic cabbage feeding, piling, and unloading system for tractor implement Chinese cabbage harvester. IFAC Proceedings 33(29): 259-263. https://doi.org/10.1016/S1474-6670(17)36787-3

10.1016/S1474-6670(17)36787-3
62

Sri Lanka mirror (SM). 2024. China's first self-developed cabbage harvester starts operation. Sri Lanka Mirror. Retrieved August 22, 2024, from https://srilankachinahotline.srilankamirror.com/news/chinas-first-self-developed-cabbage-harvester-starts-operation

63

Swe, K.M., Islam, M.N., Chowdhury, M., Ali, M., Wing, S., Jun, H.J., Lee, S.H., Chung, S.O., Kim, D.G. 2021. Theoretical analysis of power requirement of a four-row tractor-mounted Chinese cabbage collector. Journal of Biosystems Engineering 46(2): 139-50. https:// doi.org/10.1007/s42853-021-00094-x

10.1007/s42853-021-00094-x
64

Swe, K.M., Chowdhury, M., Reza, M.N., Ali, M., Kiraga, S., Islam, S., Chung, S.O., Hong, S.J. 2022. Physical and strength properties of radish and Chinese cabbage. Precision Agriculture Science and Technology 4(2): 91-106. https://doi.org/10.12972/pastj.20220008

10.12972/pastj.20220008
65

Tong, W., Zhang, J., Cao, G., Song, Z., Ning, X. 2023. Design and experiment of a low-loss harvesting test platform for cabbage. Agriculture 13: 1204. https://doi.org/10.3390/agriculture13061204

10.3390/agriculture13061204
66

Univerco. 2024. Cabbage harvester COMMANDER I. Retrieved September 3, 2024, from https://univerco.com/en/product/cabbage-harvester-commander-i/

67

VME (Vanhoucke machine engineering). 2024. VITUS Brassica Industry. Retrieved September 3, 2024, from https://vanhoucke.engineering/en/product/cabbage/vitus-brassica-industry/

68

Vrochidou, E., Tsakalidou, V.N., Kalathas, I., Gkrimpizis, T., Pachidis, T., Kaburlasos, V.G. 2022. An overview of end effectors in agricultural robotic harvesting systems. Agriculture 12: 1240. https://doi.org/10.3390/agriculture12081240

10.3390/agriculture12081240
69

Wang, W., Wang, S., Zhang, J., Lv, X., Yi, Z. 2022. Experiment and research on cutting mechanical properties of little cabbage. Applied Sciences 12(4): 2060. https://doi.org/10.3390/app12042060

10.3390/app12042060
70

Wang, Z. 2011. Overall Design of 4YB－I Cabbage Harvester[D]. Lanzhou: Gansu Agriculture University, 2011. (In Chinese with English abstract)

71

Xiao, H.R., Jin, Y., Cao, G.Q. 2019. Research on mechanization equipment technology for vegetable production; China Agricultural Science and Technology Press: Beijing, China, pp. 18-20.

72

Yang, G.W., Park, S.J., Park, W.J., Kim, M.S., Moon, B.E., Kim, H.J. 2022. Development and performance test of prototype Chinese cabbage harvester (I). Journal of Agriculture and Life Science 56(4): 113-123. https://doi.org/10.14397/jals.2022.56.4.113

10.14397/jals.2022.56.4.113
73

Yang, L.M., Fang, Z.Y., Zhang, Y.Y., Zhuang, M., Lv, H.H., Wang, Y., Ji, J.L., Liu, Y.M., Li, Z.S., Han, F.Q. 2021. Research progress on cabbage genetic breeding during 'The Thirteenth Five-year Plan' in China. China Vegetables 1(1): 15-21. (In Chinese)

74

Yonhap news agency (YNA). 2008. Farmers harvest Chinese cabbage for exports to Taiwan. https://en.yna.co.kr/view/PYH20081007032200341

75

Yu, X., He, H., Zhao, X., Liu, G., Hu, L., Cheng, B., Wang, Y. 2022. Determination of 18 intact glucosinolates in brassicaceae vegetables by uhplc-ms/ms: comparing tissue disruption methods for sample preparation. Molecules 27(1): 231. https://doi.org/10.3390/molecules27010231

10.3390/molecules27010231
76

Zhang, J., Cao, G., Jin, Y., Tong, W., Zhao, Y., Song, Z. 2022. Parameter optimization and testing of a self-propelled combine cabbage harvester. Agriculture 12(10): 1610. https://doi.org/10.3390/agriculture12101610

10.3390/agriculture12101610
77

Zheng, J., Wang, L., Wang, X., Shi, Y., Yang, Z. 2023. Parameter Calibration of Cabbages (Brassica oleracea L.) based on the discrete element method. Agriculture 13(3): 555. https://doi.org/10.3390/agriculture13030555

10.3390/agriculture13030555
78

Zhou, C. 2013. Study on the cabbage key harvesting technology and harvester; Northeast Agricultural University: Harbin, China.

79

Zhou, C., Luan, F., Fang, X., Chen, H. 2017. Design of cabbage pulling-out test bed and parameter optimization test. Chemical Engineering. Transactions 62: 1267-1272. https://doi.org/10.3303/CET1762212

80

Zonna, B.V. 2017. Kooloogst Machines Brochure. Retrieved from https://www.zonna.nl/wp-content/uploads/2017/07/Folder-Kooloogst.pdf

Information
  • Publisher :Korean Society of Precision Agriculture
  • Publisher(Ko) :한국정밀농업학회
  • Journal Title :Precision Agriculture Science and Technology
  • Journal Title(Ko) :정밀농업과학기술
  • Volume : 6
  • No :3
  • Pages :218-237
  • Received Date : 2024-09-06
  • Revised Date : 2024-10-03
  • Accepted Date : 2024-10-04
  • DOI :https://doi.org/10.22765/pastj.20240016
Journal Informaiton Precision Agriculture Science and Technology Precision Agriculture Science and Technology
Online Submission & Review System
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • KCI 문헌 유사도 검사
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close